| PRESSURE CONTROL REGULATOR “PC” SERIES |
 |
- Applications: Designed to be Installed into the Head of a Small Compressor (Less than 2Hp) Direct Drive, Tankless; Where a Variable Pressure Relief Valve is Required
- A Micrometer Type Scale Allows for Easy & Accurate Adjustment from 0-100 PSI
- Construction: Brass body & Internals, Stainless Steel Poppet with Fluorocarbon O Ring
- Nylon Knob
- Maximum Temperature: 250˚F
- Maximum Flow 6 SCFM at 100 PSI
|
| FILLER VALVE “TV” SERIES |
|
- Applications: Use Wherever a Method of Inflating a Tank with a Standard Air Chuck is Required
- Construction: Brass Valve Core with Viton and Teflon Seals
- Black Plastic Cap Included
- Maximum Temperature: 250˚F
- Maximum Pressure: 250 PSI
|
DRAIN COCKS (DCE) |
|
- Applications: Compressor Receivers, Radiators and Pool Equipment Where Stem Removal is Not a Requirement.
- Construction Brass Body & Stem with Zinc Plated Steel Handle
- Maximum Pressure 200 PSI
- Maximum Temperature 200 ˚F
- Loc-Tite Vibra Seal Standard
- Available Sizes: 1/8”, 1/4”, 3/8”, 1/2”
Part No |
NPT |
DCE-12 |
1/8 |
DCE-25 |
1/4 |
DCE-38 |
3/8 |
DCE-50 |
1/2 |
|
DRAIN COCKS "DT" SERIES |
|
- Applications: Designed for Applications where the Traditional Drain cock is Easily Damaged
- Opens Easily and Closes with Minimum Effort
- Construction: Brass Body & Knurled Brass Stem
- Nitrile O Ring Ensures a Bubble Tight Seal
- Maximum Pressure: 200 PSI
- Maximum Temperature: 200˚F
- 1/4” Connection
- Loc-Tite Vibra Seal Standard
|
DRAIN COCK with PULL CORD “DP” SERIES |
|
- Applications: Industrial and Automotive
- Brass Stem Tilts to Open the Valve at Minimum Pull Cord Force
Stainless Steel Spring Returns the Stem to Positively Seal
Against the Nitrile O Ring when Force on the Cord is Release
- Construction: Brass Body, Washer and Stem
- Maximum Pressure: 200 PSI
- Maximum Temperature: 200˚F
- Standard Cable Length 5 FT
- Loc-Tite Vibra Seal Standard
|
BLOW GUNS |
|
Part No |
NPT |
|
FPT |
BG3020 |
1/4 |
|
