|
One common method of increasing the capacity of a given sized air-oil separator is through the use of pleated filter media. In this case, the filter media is processed through a machine whereby the normally flat surface is “pleated” or induced into a wave-like appearance. A separator con-figured in this manner can then be suited for approximately 2x the air flow capac-ity, as that of a standard air-oil separator, manufactured in the standard, wrapped method. |
|
|
| |
|
|
A |
B |
C |
D |
Part No.
|
Capacity
|
Flange OD
inches / mm |
Flange ID
inches / mm |
Length
inches / mm |
Body OD
inches / mm |
| KV150-013P |
|
7.88 / 200 |
3.88 / 99 |
6.81 / 173 |
6.75 / 171 |
| KV210-004P |
|
7.88 / 200 |
3.88 / 99 |
9.88 / 251 |
6.75 / 171 |
| KV525-001P |
|
10.66 / 271 |
5.25 / 133 |
16.00 / 406 |
8.38 / 213 |
| KV820-001P |
|
10.66 / 271 |
5.25 / 133 |
24.00 / 610 |
8.38 / 213 |
| KV1970-001P |
|
23.75 / 603 |
15.00 / 381 |
22.25 / 565 |
19.00 / 483 |
| KV3000-001P |
|
23.25 / 591 |
15.00 / 381 |
36.25 / 921 |
19.00 / 483 |
|
|
|
