|
The standard conventional oil separator is the original design for the removal of oil aerosols from the compressed air stream. This element design consists of a specific amount of a uniform grade of borosilicate glass fibers, “wrapped” onto a support tube. When properly sized to the cfm/m3/min flowrate and corresponding operating pressure of the machine, this element will provide consistent performance according to the following data: |
|
|
| |
| A. |
Pressure drop (initial) 2-3 psi / .20 bar |
| B. |
Pressure resistance 70 psi / 5 bar |
| C. |
Efficiency 2-3 ppm / 2-3mg/m3 residual oil |
|
|
|
