| Pressure Switch: |
 |
Model Number |
PDA4 |
|
| The PDA4 can be installed anywhere in a pneumatic or hydraulic system. It is often used to protect air compressors and pneumatically operated equipment from damage caused by over-pressurization. The unit can be set in a normally open or closed position in an adjustable actuation range from 25psig to 95psig with +- 2% repeatability. The pressure switch has standard 18" wire leads of 300V, 22 AWG. For simple installation, thread the unit into the port of a regulator or pipe tee. | |
| More Information |
| Minature Relief Valves: |
 |
Model Number |
|||
E291 |
E292 |
E191 |
E192 |
|
 |
Minature, diaphram relief valves with exceptional sensitivity. Ideally suited for applications requiring proportional relief. 3 position knob pushes to lock and can be removed for tamper resistance. | |||
| More Information | ||||
| Y Strainer: |
 |
Model Number |
|
S202 |
S204 |
|
| A Y strainer installed ahead of an external drain, traps large debris and sludge; prevents malfunctions and extends the life of automatic drains. | ||
| More Information | ||
| Slide Valve: |
 |
Model Number |
||
V202 |
V203 |
V204 |
|
| Arrow's new slide valve is a 3 way OSHA lockout valve which exhausts all downstream pressure when closed, and can be locked in the closed position with customer supplied lock. | |||
| More Information | |||
| Regulator Accessories: |
Regulator Accessories |
|||||
 |
|||||
| Arrow Regulators may be panel mounted to improve machine design and overall appearance, they are convenient for control panel or console mounting. | |||||
Panel Mounting Regulators |
|||||
Regulator Model |
Suffix for Panel Mount |
Panel Hole Size |
Dimensions & Max |
||
A |
B |
C |
|||
Tri Star & Midflow Series |
P |
1 13/16" |
1 1/4" |
2 22/32" |
1/2" |
Tri Star & Midflow Series |
Q |
9/16" |
3 1/2" |
2 23/32" |
5/16" |
| Brackets: |
 |
Brackets |
| Arrow offers a various selection of mounting brackets for our product line. | |
More Information |
| Air Flow Check Valves: |
 |
Model Number |
|
5074 |
5076 |
|
| These are designed to protect workers from accidents caused by air hose whip, a potentially dangerous situation that occurs when air hoses snap while under high pressure loads. | ||
| More Information | ||
| Pressure Snubbers: |
 |
Model Number |
|
602 |
602-E |
|
| These units protect pressure instruments from sudden shock and ensure accurate gauge readings without surges and fluctuations. | ||
| More Information |
||
| Standard Inserts & Accessories: |
 |
Standard Outboard Diverter |
|
DK54
|
1/4" NPT |
|
| The Standard Outboard Diverter block attaches to the outlet port of any Standard unit and allows air to be diverted to up to 3 1/4" outlets. Includes locking plate and "0" rings, and it will accept the standard mounting bracket. | ||
| More Information |
||
 |
OSHA Lockout, 3-Way Valve |
|
|
V252 |
1/4" NPT |
|
V253 |
3/8" NPT |
|
V254 |
1/2" NPT |
|
| Arrow's 3-way OSHA lockout valve exhausts all downstream pressure when closed and can be locked in the closed position with customer supplied pad lock. These valves will handle all standard system air flows and will exhaust scfm @ 100 psi. | ||
| More Information |
||
 |
Mounting Bracket |
|
|
IK52 |
IK53 |
|
IK54 |
IK56 |
|
| IBK5 wall mounting bracket for Modular standard FRL units permit bracket mounting from inlet and outlet ports, slide valve and diverter blocks. | ||
| More Information |
||
| Modular Components & Accessories: |
 |
Standard Connector Insert |
IK50
|
|
| Standard insert slides ae designed to guide the insert to an interlocking position on the unit body. The design of the slide also provides a unique safety feature, should the insert plates be removed while the air line is under pressure, the interlocking slide will prevent blowing away. | |
| More Information |
 |
Standard Pipe Port Insert |
|
|
IK05 |
"0" rings for Modulars |
|
IK52 |
1/4" NPT |
|
IK53 |
3/8" NPT |
|
IK53 |
1/2" NPT |
|
IK53 |
3/4" NPT |
|
| Any of four separate standard ports permit instant pipe sizing of every standard filter, regulator and lubricator. Available in multiple sizes for inlet and outlet ports. Zinc Diecast metal is the material it is made from. | ||
| More Information |
||
 |
Standard Diverter |
|
|
DK52 |
1/4" NPT |
|
DK53 |
3/8" NPT |
|
| Any of four separate standard ports permit instant pipe sizing of every standard filter, regulator and lubricator. Available in multiple sizes for inlet and outlet ports. Zinc Diecast metal is the material it is made from. | ||